How to assemble a wig

Assemble a metal wig stand

How to assemble a wig. Your metal wig has two parts. These parts look almost identical. To assemble, you need to determine which part is the top and which is the bottom. Look at the notch above. The workpiece with the notch facing down is your workpiece A. The cut of work B will face up.

Slide piece A onto piece B through the lower part of the bracket. Push part A over part B and secure the notches together. The metal wig stand is equipped with rubber plugs already on the legs. If not, install them now.

Assemble a plastic wig stand

How to assemble a wig. Plastic wig stands are assembled much like metal wig stands. Just like a metal stand, you need to determine which one is on top and which one is on the bottom. There will be an upward gap at the bottom of your work 1. Piece 2 has no gap.

You need to cross the first part of the second part. Piece 2 will slide into the notch at the bottom of piece 1. Press these pieces together. Now slide these parts together until they are firmly connected at the top of the notch. Your plastic wig stand may come with a locking mechanism to prevent it from moving during styling. Slide the circular lock into the corresponding groove on the top of the bracket to maintain stability.